Videos
Acoustic Echo Cancellation Video
Soundweb London Family Overview
Soundweb London Room Combine
BLU-10 Demonstration
Product Downloads
Soundweb London A & E Specs[73.0 KB]
Soundweb London Technical Specs[22.5 KB]
Setup Guide[904.4 KB]
BLU-3 Installation Guide[172.0 KB]
BLU-3 DXF File Front[27.0 KB]
BLU-3 Front Image
[109.8 KB]
BLU-3 Side Image
[106.1 KB]
BLU-3 Datasheet[251.4 KB]
Soundweb London Family Brochure[1.3 MB]
Third Party Control Modules
Crestron Third Party Control Module[4.1 MB]
AMX Third Party Control Module[1.7 MB]
Crestron Third Party Control Module[4.1 MB]
Software
HiQnet London Architect
Version [0.0 KB]
Warranty
RoHS
BLU-3 Wall-Mount Controller
The BLU-3 and BLU-6 wall panels are simple controllers which allow the designer to provide level control and source selection or preset recall in a simple wall-mounted panel.
These controllers connect to the control ports on the rear of any BLU-16, BLU-32 or BLU-80 device.
The BLU-3 offers a rotary fader and a five-way switch. The switch could select system presets (configurations specific to times of the day for example) while the rotary control could be assigned to act as a zone volume control.
The BLU-6 offers an eight-way switch, but instead of a rotary volume control has a pair of spin or up/down buttons, enabling the same level parameter to be mapped onto other controllers preventing a jump in audio level when the control is adjusted
The switches on both units have blank areas for marking the switch functions, either directly onto the white area, or on self-adhesive labels.
These controllers connect to the control ports on the rear of any BLU-16, BLU-32 or BLU-80 device.
The BLU-3 offers a rotary fader and a five-way switch. The switch could select system presets (configurations specific to times of the day for example) while the rotary control could be assigned to act as a zone volume control.
The BLU-6 offers an eight-way switch, but instead of a rotary volume control has a pair of spin or up/down buttons, enabling the same level parameter to be mapped onto other controllers preventing a jump in audio level when the control is adjusted
The switches on both units have blank areas for marking the switch functions, either directly onto the white area, or on self-adhesive labels.