9015 with 9088iis

BaranMark · Joined: 25 Mar 2008 Posts: 2

I would like to know if there is a way to use a 9015 controller to individually adjust several different gain faders with the selector switch choosing between the faders. I need to be able to adjust 3 input gain stages and 5 output faders independently and using configurations/presets is problematic since the gain settings on the idle faders revert to their original values when changing configurations.

I remember that there was a post long ago concerning the use of a resistor ladder switch and single pot to accomplish this type of control but I cannot find this post (if indeed it did exist).

All help will be greatly appreciated.

Mark

Dan Lynch · Posted: Wed Mar 26, 2008 9:11 am Post subject:

This can't be done with the 9015 and a 9088.

It can be done with a 9015 and a BLU-xx Soundweb London device using logic processing and serial strings.

Dan
_________________
I know that you believe you understand what you think I said, but I'm not sure you realize that what you heard is not what I meant.

BaranMark · Joined: 25 Mar 2008 Posts: 2

Thanks for the confirmation, Dan. I will move the controllers up to 9010s.

Dan Lynch · Posted: Wed Mar 26, 2008 9:36 am Post subject:

Depending on how many controllers you're talking about, it'll probably be cheaper to use BLU-16 or BLU-160 devices and 9015 controllers.

Dan
_________________
I know that you believe you understand what you think I said, but I'm not sure you realize that what you heard is not what I meant.